Sample Recording
Record up to 30 seconds from a microphone or audio interface in the standalone app.
Standalone sample input
| Item | Behavior |
|---|---|
| Input | Record from microphone or connected audio interface in the standalone app |
| Monitor | Use AUDIO to check permission, the active input and output, channel, and level |
| Limit | Recording stops at 30 seconds |
| Save | Name the result and choose one of 10 user-bank slots for the selected voice |
Record a new sound
- 01
Choose a voice
Open Pads, select a voice, then tap SOUND.
- 02
Check AUDIO
Confirm microphone permission and the active input and output. If multiple channels are available, choose a channel.
- 03
Start recording
Tap RECORD. TEMPO-1 opens a recording panel with a live waveform and input level.
- 04
Stop
Tap STOP RECORDING. TEMPO-1 turns the take into an editable draft.
- 05
Finish
Trim, gain, preview, name, and save the draft to a user-bank slot.
Input channel notes
- All Channels averages the available input channels into one mono recording.
- If a class-compliant USB interface exposes multiple channels, choose one from the AUDIO tab before recording.
- If an interface is reconnected or the route changes, reopen AUDIO and confirm the active input, output, channel, and level before recording.
- Loop capture and sample recording are separate. Stop loop capture before recording a new sample.
- Sample input recording is available only in standalone TEMPO-1.
- To move a standalone sample into AUv3, save it in a user preset, Export Bank in standalone, then Import Bank in AUv3.